- Model NO.: tengfei-2016
- Condition: New
- Customized: Customized
- Automatic Grade: Automatic
- Green Product: Free of Pollution
- Specification: 2 million and up to 30 million sqm per year
- HS Code: 84748090
- Certification: SGS, CE, ISO
- Screw Design: Double-Screw
- Power Source: Electric
- Product Type: Wall Board Machine
- Trademark: TF
- Origin: China
Raw Materials Consumption for per Square Meter Gypsum Board of gypsum board production line:
|Fiberglass (Not need badly)||0.025kg/m2|
|Heavy oil: 11000kcal/kg||Heat consumption: 3800kcal/m2|
|Natural gas: 8500kcal/ m3||Heat consumption: 3800kcal/m2|
Gypsum board - skin for the wall
Gypsum is the ideal surface for a wall because it has the same PH value and thermal conductivity properties as the human skin. Building materials made of gypsum always feel warm when touched. This is no deception as gypsum possesses low thermal conductivity properties. As a result, gypsum building materials store warmth within a building. Nature has presented us with a highly effective moisture management system in gypsum. The gypsum can absorb a lot of humidity through its open and crystalline pores and then automatically releases this moisture when a room becomes too dry. This works as often as necessary, and without consuming energy.
The gypsum board size varies with countries. The board length is from 1.5 to 4 meters(adjustable), the board width is 1.2m or 1.22 meters, and the board thickness is from 7mm to 20mm(adjustable).
Based on the application areas of the gypsum board, it is categorized into three: regular gypsum board, fire resistant gypsum board and moisture resistant gypsum board.
The gypsum board production line is composed of raw material batching system, mixer, board forming station, board setting line, cut-off knife, transfer table, dryer, booking machine, trimming machine and stacker. It is fully automatic.
Gypsum board production line capacity
Basic formula of gypsum board(board thickness: 9.5mm)
The formula will be adjusted according to the working raw material quality and local production situation.
Features of the gypsum board production line
Automatic raw material batching system:
The feeding speed of gypsum stucco, water and additives is automatically and precisely controlled. It ensures the accurate supply of all kinds of raw materials, and labor cost is saved.
IPC and PLC can achieve communication, and share data with each other to make central control. All data can be shown on computer monitor and inspection can be done through computer.
Hot air drying technology is adopted in the drying system. It ensures the temperature in each deck of the dryer is the same, the gypsum board is evenly dried and it makes the production line more energy-saving.
Typical process of the gypsum board production line
Installation of the production line and training to the operators
Engineers and technicians from our company will be dispatched to the installation site to give instruction in the installation and commissioning work. The buyer shall supply welding workers and fitters to cooperate in the work of installation and commissioning. During the installation and commissioning, the buyer's operators will be trained in respecting of operation, trouble-shooting and maintenance by the technicians and engineers.